Stereo Receiver

Help connecting stereo receiver and speakers to the cable box and TV?

I have a 1995 JVC receiver stereo, 2 speakers and a tour of Sony XBR4 Sony 42 "LCD. Moreover, I have an HD cable box DVR. I must begin by saying that I do not know much about the connection of components, so I'm kind of trying to use common sense but that's about all I have in terms of knowledge. What I did is to connect the stereo receiver to the cable box with an RCA cable. through audio output, and the other end into the stereo receiver through the video sound / band SPOT 2. When I touched the button of his Video on the front of the receiver, I can switch between the radio tuner and the sound of the TV. The problem I have with this is that when the TV sound comes through the speakers and TV, it sounds like I'm in a stadium listening to the advertiser - a sound really annoying echo. I do not know if I plugged it wrong, or if I plug the cable into another location on the receiver or something! All suggestions will be tested and evaluated. Thank you!

Perhaps your hearing both his television and stereo sound receiver, which may not be in sync. Try to down or mute the TV to see if that is the problem. I keep my sound of television has declined and only use my stereo. Other than that, being up tape2 should not be a problem on the receiving side. The only other thing would be the cable box does not work as it should. You could also eliminate this thought by winning the RCA plugs into the cable box and connect to the back of the TV via audio output and see if this is much better. Good luck

---

---

Account limit of 2000 requests per hour exceeded.