Chassis Socket

Why there are 4 son in some of my shots kitchen?

I recently replaced all the electrical outlets in my kitchen because I renovated the kitchen together. Most catches are a white wire, black wire plus ground wire, but four catches in the Kitchen has 4 son - white, black, red and ground. These four sockets have a circuit breaker for each trip to the fuse box. I plugged the son catch the way I thought I had disconnected from their sockets above the white wire that is on one side, then red and black connected to the reverse side. Land connected to the chassis. When I switch on, the trip breaker immediately. These are the only outlets assigned - Catch the rest of the house are fine. If I did not connect the 4 outlets, the waves did not fire. Can anyone tell me why it is the common thread of most in the bushes? The red wire should be connected on the same side as the white wire? Thank you! Bob

Take recepticles and side with brass screws there is a small tab that connects the two screws. break this off. (it is for you to do so). Connect to a live black and red one.

---

---

Account limit of 2000 requests per hour exceeded.